FermZilla Gen 3.2 27L Tri-Conical Fermenter Starter Kit

Introducing the FermZilla Gen 3.2 27L Tri-Conical Fermenter. Now with 3in tri-clover ferrule moulded into the tank and a 600ml collection jar with 3in tri-clover connection. These tri-clovers are the gold standard for sanitary and effortless removal. 

The new FermZilla is a revolution in homebrewing allowing home brewers and small micro-breweries a level of control that meets all budgets. FermZilla gives you many of the benefits of more expensive stainless conical fermenters but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 35psi (2.4 bar).

What does the starter kit come with?

• 1 x 27L Conical FermZilla Tri-Conical Base Kit (unassembled)
• 1 x 27L Gen 3.2 Tri-Conical Tank with metal neck ring
• 1 x Standard Top Lid with Red PRV (35psi)
• 1 x Collar Lid Ring
• 1 x Grommet Black Cap + 1 x Blank Black Cap for lid
• 1 x Premium 3 Piece Airlock
• 1 x 3in tri-clover to 3in tri-clover Butterfly Valve
• 1 x 600ml Collection Jar 
• 2 x Blank PCO1881 Black Cap
• 1 x 3 piece ~ 3in tri-clover clamp (+ 1 x 3in Beaded Silicone Seal)
• 1 x 2 piece ~ 2in tri-clover clamp (+ 1 x 2in Beaded Silicone Seal)
• 1 x Stainless Stand with swing handles
• 1 x Stainless Steel Handle Assembly
• 1 x Strip Stick On Thermometer
  
• 1 x Level Indicator Sticker (Litres and Gallons)
  
• 1 x Spare Lid O-Ring
• 1 x Spare Collection Container O-Ring

Instructions:

To download the instruction sheet for this product click on the link below:

FermZilla 27L - Tri-Conical PDF Instruction Manual

Dimensions:

To download the dimensioned drawings for this product click on the link below:

FermZilla 27L Tri-Conical Dimensioned Drawing

Hydro Test:

Vital information that is related to safely performing a hydro test of a FermZilla tank which is past its stamped expiry date:

FermZilla Hydro Test Instruction Manual

Warnings:

Please read the instructions thoroughly before use (from KegLand).

We will not be held liable for misuse or mishandling of the unit contrary to the instructions.

Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.

Do not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time. To do this. Fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads by tipping it upside down, in all directions where there are risks of leakage. 

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure.